 |
 |
 |
 |
Features
-
Weight: 100g each - giving good balance of weight on face (nominal)
- Trapezoidal shape, gives great field of vision and balance of weight on face
- Protection from organic vapours with boiling points >650C
- Low breathing resistance
- Tested and complies with AS/NZS 1716:2003 class A1B1E1K1 gas/vapour filter when used with compatible 3M respirators
-
Fit all 3M 6000, 3M 7000 & 3M 7500 Series Half Masks and Full Face Masks
-
The 3M™ Cartridge Filter 6059B can be used in industries where excess levels of organic vapours / inorganic gases / acid gases / ammonia and methylamine are present in the workplace atmosphere.
-
Extra fitting of a 3M Particulate Filter 5925 P2 and the 501 retainer over the 6059B will give a combination organic vapour/ acid gas / particulate filter if extra protection is needed. This will be capable of providing protection against dusts mists and fumes as well as organic vapours / inorganic gases and acid gases.
- When selected and used in accordance with AS/NZS 1715, this filter cartridge is capable of providing protection against organic vapours with boiling points >650C, inorganic gases such as chlorine, and acid gases such as sulfure dioxide and ammonia and methylamine at levels up to ten (10) times the Exposure Standard on a half face mask and up to fifty (50) times the Exposure Standard on a full face mask OR up to a maximum of 1000ppm whichever is lower.
Click here to see our full range of face masks and disposable respirators
|
|
 |
 |
 |
 |
|
 |

|